[2017-01-15] Version 1.5
-Does not minimize window when started
-Does not disengage FSX/P3D built-in autopilot when the G1000 autopilot is not engaged

[2017-07-12] Version 1.6
-Added date sychronization
-Added panel light synchronization for the backlight of the hardware bezel
-Corrected wind heading display for FSX/P3D

[2018-02-14] Version 2.0
-Added AP master switch synchronization
-Added auto-connection
-UDP port changed, not compatible with older versions

[2019-02-26] Version 2.1
-Fixed the bug that makes the PFD doesn't turn off with the battery switch

[2019-12-16] Version 2.2
-All settings are now saved
-Added settings to map some unused buttons on hardware audio panel to X-Plane's datarefs or key strokes

[2020-08-06] Version 3.0
-Added support for hardware switch panel and standby gauges
-Added support for more engine types

[2020-08-23] Version 3.1
-Replace engine RPM to prop RPM to show the correct RPM for turboprop engine(for apps 6.0.0 and above)

[2020-09-12] Version 3.2
-Identify FS versions so autopilot in PFD will send control data optimized for FS2020(requires FDP app v6.0.1 or later)
-Recalculation for the engine load percentage(requires FDP app v6.0.1 or later)
-Fixed a crash when FSX or FS2020 quit

[2020-09-23] Version 3.3
-Fixed a bug causing ATC sound broken in FS2020

[2020-11-21] Version 3.4
-Fixes LOW VOLT warning with FS2020 by copying the value of BUS M to BUS E
-Fixes showing opposite value for BATT M with FS2020

[2021-02-22] Version 3.5
-Adds option 'reverse' for hardware compass
-Adds support for GA(go around) button on the hardware cockpit panel
-Adds support for alternate static source lever on the hardware cockpit panel

[2021-03-7] Version 3.6
-Improves support for hardware flaps lever and indicator

[2021-12-21] Version 3.8
-Adds rudder trim data output

[2022-04-17] Version 3.9
-Adds support for hardware fuel valve and fuel selector

[2023-05-15] Version 4.0
-Utilizes MobiFlight WASM module for MSFS to make hardware switch panel fully works
-Radio frequencies with 8.33kHz spacing are now fully supported
-Fixes an issue causing the target altitude not synced properly

[2023-06-14] Version 4.1
-Fixes a bug causing NAV frequencies not transferring from PFD to the game

[2023-08-24] Version 4.2
-Adds automatic connection to hardware switch panel, standby gauges and pedestal

[2024-01-17] Version 4.3
-Fixes a bug causing COM ports kept occupied after an auto-connection failure

[2024-03-25] Version 4.4
-Fixes a bug causing the calibration of the hardware flaps lever is not effective immediately
-No need to calibrate the hardware compass before using it